profile conveyors

Standard LOWPRO Modules

Straight Body Modules

Standard Straight Module

Standard straight run body modules. All modules are “plug-and-play” - simply bolt them together, add a head and tail and your conveyor is ready to go, further reducing costs.

ITEM NO.          LENGTH
SLP-M01-05      3000mm
SLP-M01-04      2400mm
SLP-M01-03      1800mm
SLP-M01-02      1200mm
SLP-M01-01       600mm

Drive Options

 

Standard Drive

LowPro drive module gives your conveyor motion using an electric motor-drive unit.

Drive modules (or a transfer module) are required at the start of all
LowPro conveyors.

Available in vertical and horizontal (shown) drive orientations.

ITEM NO.       MOTOR POSITION
SLP-M03-01    Horizontal
SLP-M03-02    Vertical

 

Under Body Drive

LowPro Under Body Drive conveniently positions the motor under the conveyor body to resolve space or access limitations.

ITEM NO.    DESCRIPTION
SLP-M04     Under-body

 

Turntable Drive

An alternative to the standard drive modules where a change in direction is also required. This turntable will join two extended conveyor runs and provide an intermediate drive location.

ITEM NO.    ANGLE
SLP-M12     90°
SLP-M13     180°

Idler / End Module

Idler / Tail / End Module

An end terminating module of the conveyor is required as the final module of all  systems. This returns the chain on the underside of the conveyor.

ITEM NO.    DESCRIPTION
SLP-M02     Std Tail

Curves

 

90 Degree Tight Radius Curve

90 Degree tight radius curve suitable for areas where space is limited. Suits smaller size product which can travel around the tighter radius

ITEM NO.    ANGLE
SLP-M10     90°

180 Degree Tight Radius Curve

180  Degree tight radius curve suitable for areas where space is limited. Suits smaller size product which can travel around the tighter radius

ITEM NO.    ANGLE

SLP-M11     180°

Standard Curve Module

Standard curve module suitable for most application. Allows change in direction of the product line.

Note: Custom angles are available on request.

‘Magnet Flex’ curves for full wash down applications are also available.

ITEM NO.       ANGLE
SLP-M05-01     90°
SLP-M05-02     60°
SLP-M05-03     45°
SLP-M05-04     30°
SLP-M05-05     15°

Inclines / Declines / Vertical Bends

Incline/ Decline Sections

Incline/decline sections allow a change in elevation of the product line.

Note: System constraints may apply.

Not suitable for all applications.

ITEM NO.      ANGLE

SLP-M14-01    2°
SLP-M14-02    5°
SLP-M14-03    10°
SLP-M14-04    20°
SLP-M14-05    30°

Vertical Curve Module

Curve module designed to be used in the vertical orientation.

Note : System constraints may apply.

ITEM NO.     ANGLE
SLP-M15       90°

Transfers & Merges

Side Transfer Module

For extended run conveyors, this module transfers product from one length of conveyor to the next. Side transfers should be used for conveyors over 9m long (product weight dependant)

ITEM NO.     LENGTH
SLP-M06      1625mm

Cross Transfer Module

An alternative to the Side Transfer Module for long run conveyors. Minimises the product transition zone for products that are difficult to handle- minimal deviation from a direct straight-line path when transitioning between conveyors.

ITEM NO.    LENGTH
SLP-M07    1765mm

End-to-end Direct Transfer Module

An alternative to the Side Transfer Module for long run conveyors. Allows the product to move along a continuous straight line path whilst crossing to the next conveyor using a transition roller zone.

Note: Not suitable for conveying all products.

ITEM NO.    LENGTH
SLP-M08     700mm

End-to-end Transfer Link Module

This module can join two existing conveyors together, end-to-end. Transfers product from one length of
conveyor to the next using a transition roller zone.

ITEM NO.    DESCRIPTION
SLP-M16     Linking Module

 

1-TO-2 DIVERT/ 2-TO-1 COMBINE MODULE

For splitting or combing product from/into multiple lines.
Note: (Divert Module shown)

ITEM NO.    LENGTH

SLP-M09    1200mm

Accessories

Legsets

Available in various types and materials, including side-mount, bipod mount and fixed mount.

Some legset types are height adjustable, others are available in customised, fixed heights.

ITEM NO.          DESCRIPTION

SLP-M20-01      Single, side-mount leg
SLP-M20-02      Bipod Leg - Straight module mount
SLP-M20-03      Bipod Leg - Curve module mount
SLP-M20-04      Aluminium Post (fixed height, rigid mount)
SLP-M20-05      Aluminium Frame, ideal for uneven surface & incline/decline modules (fixed height)

Guide Rails

Guide rails to help guide and position product. Width adjustment allows for variations in product size.
Available in Flat bar, single round or twin bar to suit your application and shape on the conveyor line.

ITEM NO.       DESCRIPTION
SLP-M19-01    Single Round Bar
SLP-M19-02    Twin Round Bar
SLP-M19-03    Single C-Cap Flat Bar